LÖWE 5.105

Small anvil pruner with a surprising performance for cutting wood, plastic, rubber and similar material. All parts separately available and easily to replace. Length of cut: 25 mm.

LÖWE 1.105

Anvil pruner with bent end of handle for a better handling of the cutter when shore up against a steady ground.

LÖWE 3.105

Anvil cutter as item 1.105, but with a cutting length of 50 mm.

LÖWE 3.305

LÖWE 3.101

Mitre cutter as item 3.104 with stop faces at 45°, but without plastic handle covers.

LÖWE 3.104

LÖWE 3.105

Anvil cutter as item 1.105, but with 50mm length of cut.

LÖWE 3.106

Slat cutter with stop faces at 90°.

LÖWE 3.106/50K

Slat cutter with stop faces at 90°, 50 mm length of cut. Slat cutter as item 3.106, but with plastic underlayment.

LÖWE 3.104/HÜ

Mitre cutter as item 3.104 but with leverage for hard materials. Very easy cutting effect.

LÖWE 3.105/HÜ

Anvil cutter with leverage , 50 mm length of cut.

LÖWE 3.106/HÜ

Slat cutter as item 3.106, but with leverage, with stop faces at 90°.

LÖWE 3.304

Mitre cutter with stop faces at 45°, 75 mm length of cut.

LÖWE 3.305

Anvil cutter without stop faces, 75 mm length of cut.

LÖWE 3.306

Slat cutter with stop faces at 90°, 75 mm length of cut.

LÖWE 3.304/HÜ

Mitre cutter with leverage and stop faces at 45°, 75 mm length of cut.

LÖWE 3.305/HÜ

Anvil cutter with leverage, 75 mm length of cut.

LÖWE 3.306/HÜ

Slat cutter with leverage and stop faces at 90°, 75 mm length of cut.

LÖWE 3.604

Cable duct cutters were developed for cutting cable ducts and plastic strips. The easy cutting effect is achieved by a special cutting geometry. With stop faces at 45° and 90°, 75 mm length of cut.

LÖWE 3.605

Cable duct cutter as item 3.604, but without stop faces, 75 mm length of cut.

LÖWE 3.606

Cable duct cutter as item 3.604, but with stop faces at 90°.

LÖWE 3.604/HÜ

Cable duct cutter as item 3.604, but with leverage for easier cutting.

LÖWE 3.605/HÜ

Cable duct cutter 3.605, but with leverage for easier cutting.

LÖWE 3.606/HÜ

Cable duct cutter as item 3.606, but with leverage for easier cutting.

LÖWE 5504

Suited to rubber hoses and corrugated tubing. Material is not crushed thanks to the ability of the pointed blade to plunge precisely into the material.

LÖWE 3.204/P90

Tube and Hose cutter for the easy and clean cutting of plastic box profiles up to 25 x 45 mm and rigid or thick walled plastic tubes up to 32 mm Ø. 

LÖWE 5.104/P90

Tube and Hose cutter for the easy and clean cutting of plastic box profiles up to 25 x 45 mm and rigid or thick walled plastic tubes up to 32 mm Ø. 

3.204/16u19

Tube cutter for easy cutting of plastic tubes with 16 and 19 mm Ø. Cuts without burs.

LÖWE 3.704/16u19

Tube cutter for cable conduits with diameters of 16 and 19 mm. The tube is cut without damaging the cable. The cable can be cut in the rear part of the opening.

LÖWE 3.804

Mitre cutter with trapezoidal blade, with stop faces at 45° and 50 mm length of cut.

LÖWE 3.805

Anvil cutter with trapezoidal blade, without stop faces and 50 mm length of cut.

LÖWE 3.806

Flat ribbon cable cutter with trapezoidal blade, stop faces at 90° and 50 mm length of cut. 

LÖWE 4.104/v

Cutter for sealing profiles at windows and doors V-cut.

Cutter for Y-cut.

LÖWE 4104/vr

Cutter for V-cut, with draw-in roller.

Cutter for Y-cut, with draw-in roller.

LÖWE 4204

Cutter for A-cut.

Lever cutter LÖWE 50.130

130 mm length of cut, alternatively with stop faces for 45° or 90°. Anvl lever cutter for clean and precise cut in larger dimension slats, plastic profiles and many materials more.